NEDA 301-302-303
Important advantages in the installation of Biaxial NEDA are:
- 1. The low height of all types, allows the installation without the use of crane.
- 2. Small volume of armed concrete is needed for their foundation.
- 3. Small quantity of cables is needed for the connection of the panels.
- 4. Consequently the cost of purchase and installation for each one of the (5) basic types of biaxial NEDA is particularly low.
- The time of delivery, as well as the way of payment, of your company’s order, will be fixed at the time of its confirmation.
Features:
| Support base | Hot dip galvanized steel |
|---|---|
| Tracker diameter | 28 m. |
| East-West axis | 67-294 Degrees |
| North-South axis | 17-90 Degrees |
| Sun course detection | Astronomical data |
| Maximum photovoltaic panel surface | 220 sqm |
| Max power of installation | Up to 40 kWp depending on the power, size of PV panels and layout in one or two rows |
| Maximum Coverage Surface | Project installed in a surface of 615 sqm |
| Foundation Method | Foundation of reinforced concrete piles. The maximum amount of concrete should not exceed 6 cubic meters |
| Motor | Three-phase / 1 hp |
| Motion transmission / Operation | Hydraulic |
| Motion Control | Through a PLC |
| Power consumption | To 60 kWh per year |
| Weight without frames and foundations | 1 ton per 4 kWp |
| Maximum Base Resistance (safe position at wind speed) | 155 km/h |
| Regulation of flattening at Air Speed | 110 km/h (Under normal air flow conditions) |
| Height from Ground | 1.70 m. flat – 2.40 m. in operating position |
| E/M Equipment Guarantee | 2, 5, 10, 15, 20 Years (Corresponding Support Contracts) |
| Corrosion Guarantee for All Metal Parts | 20 Years |
| Static Study | According to standards EC3, EKOS., EAK 2000 |
